<nav id="68usw"></nav>
<input id="68usw"><button id="68usw"></button></input>
<input id="68usw"><tt id="68usw"></tt></input>
<input id="68usw"></input>
<input id="68usw"></input>
<input id="68usw"><u id="68usw"></u></input>
<menu id="68usw"><u id="68usw"></u></menu>
  • <input id="68usw"><tt id="68usw"></tt></input>
  • <menu id="68usw"><acronym id="68usw"></acronym></menu>
  • <input id="68usw"><acronym id="68usw"></acronym></input>
  • 服務項目


    電話:+(86) 0755-2987 1520     


    QQ:  2851185868      


    首頁 - 服務項目 - LED燈安全檢測服務LED燈安全檢測服務
    燈具CM-5測試冷凝測試ISO 6270

    ISO 6270-2:2005標準介紹

    ISO 6270-2:2005英文簡介

    ISO 6270 is intended to give consistent conditions and procedures for the conditioning of pre-prepared test specimens which are to be evaluated for defects which may develop when they are subjected to humid ambient atmospheres such as constant condensation-water atmospheres or alternating condensation-water atmospheres.

    The tests are designed to clarify the behaviour of the test specimens in humid ambient atmospheres, and to pinpoint any defects in the protection of the test specimens against corrosion. The testing of coatings in these atmospheres does not necessarily give lifetime prediction data.

    After conditioning, the test specimens are evaluated either in accordance with agreed International Standards, such as the appropriate part(s) of ISO 4628, Paints and varnishes — Evaluation of degradation of coatings — Designation of quantity and size of defects, and of intensity of uniform changes in appearance, or by procedures agreed between the interested parties.

    1 Scope

    This part of ISO 6270 describes the general conditions and procedures which need to be observed when testing coated test specimens in constant condensation-water atmospheres or in alternating condensation-water atmospheres, in order to ensure that the results of tests carried out in different laboratories are reproducible.

    NOTE The shape and preparation of the test specimens, the duration of the test and the assessment of the test results are not covered in this part of ISO 6270.

    2 Normative references

    The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.

    ISO 3270, Paints and varnishes and their raw materials — Temperatures and humidities for conditioning and testing

    Q-fog鹽霧試驗箱用于ISO 6270-2:2005的測試方法

    Q-fog鹽霧試驗箱用于ISO 6270-2:2005的測試方法

    Q-fog鹽霧試驗箱用于ISO 6270-2:2005的測試方法

    欧美A级V片_韩国特黄视频_色色在线免费视频_老师在我床上喂我乳 百度 好搜 搜狗